Fila Stop Dirt – Dirt Repellent 500ml

Fila Stop Dirt has been designed to create a protective barrier against dirt and debris on textured and natural finish porcelain tiles.

For Use On

• Textured Porcelain Tiles
• Unpolished Porcelain Tiles
• Lappato Porcelain Tiles

Purpose

• Makes cleaning quick and easy and surfaces hygienic
• Improves the material’s resistance to dirt
• Maintains the original appearance of the material over time

Advantages

• Provides prolonged protection over time
• For interior and exterior use
• High coverage
• Does not alter the material’s anti-slip rating (tests conducted in conformity with B.C.R.A. and ASTMC 1028-2007 methods)
• Does not form surface film
• UV resistant and non-yellowing

Coverage

• With one litre: Textured, natural and Lappato porcelain tiles up to 70 m²

Application

• No dilution required: The product is ready to use
  1. Wash the floor thoroughly using Deterdek (cement grout)
  2. Apply Fila Stop Dirt to a clean and dry floor also treating the grout, covering evenly with a fleece or other suitable applicator
  3. Rub the surface with a cloth or floor scrubber with white disc
  4. Fully remove any residues within 10 minutes, either manually using a microfibre cloth or with a single-disc floor scrubber
  5. After at least 12 hours, before treading on the treated surface, remove any product residues using a clean microfibre cloth
• Application on untreated surface to be restored:
  1. Wash the floor using Fila Stain And Wax Removing Detergent and/or Deterdek
  2. Apply on the dry surface in the manner described above

Important Information

• The product may enhance the colour of the material or grouting; carry out a spot test beforehand. Aerate rooms during use. Do not apply to matt-finish lappato porcelain tiles

The Fila Stop Dirt is a great protective barrier against debris and dirt, for indoor and outdoor use.