Mapei UltraCare Keranet Cleaner 5L

The UltraCare Keranet Cleaner is an acid-based concentrated cleaning product, designed to remove cementitious residues from porcelain, ceramic and all acid-resistant materials. Provided in liquid form, this versatile Keranet cleaner is for cleaning internal or external surfaces (including façades) that have been grouted using cementitious grouts and removes concrete stains, residues of installation and grouting operations, respecting the cement grout joint.

UltraCare Keranet is suitable for use on acid-resistant materials such as porcelain, ceramic, glass mosaics, quarry tiles, terracotta and acid-resistant natural stone. It can also easily removes any limescale, rust stains and efflorescence or adhesive residues from the installed material, leaving a perfectly clean surface.

Key Features

• High performance
• Suitable for wet vac use
• Suitable for rotating cleaning machines
• Suitable for use on all acid-resistant material
• Can be used for indoor and outdoor walls and floors
• Can remove limescale, rust stains and efflorescence
• Highly effective at removing cementitious grout residues and installation dirt
• Doesn’t give off toxic fumes, making it safer for both users and the environment
• It may be used undiluted to remove engobe from porcelain and ceramic material
• Dilution with water can be altered according to the level of contamination to be removed

Technical Information

• Volume: 5 ltr
• Consistency: Liquid
• Colour: Transparent
• Shelf life: 24 months
• Waiting time before rinsing: 5 mins
• Application temperature range : 0°C – 40°C
• Dilution ratio: 1:10 or 1:5 (1 part Cleaner to 5-10 parts water)

Application Instructions

• Apply product in a temperature of 0°C to 40°C
• Only use UltraCare Keranet on completely cured grout
• Always carry out a preliminary test on a hidden sample area
• Work in manageable areas and leave to act for about 5 minutes
• Before cleaning with UltraCare Keranet protect everything that can be damaged by splashes
• Apply the product, diluted in water according to the level of residue on the surface (1:10 or 1:5) and the type of surface to be treated
• The surfaces to be cleaned, especially if very absorbent (Tuscan terracotta, porous ceramics, natural stone etc.) must be well moistened with water before treatment
• Work over the surface with a single disc cleaning machine or an emulsifying pad, then remove the solution and then rinse with plenty of clean water – for heavy residues you may need to repeat the above procedure

DO NOT USE ON: Polished marble or calcareous stone in general, limestone-based materials,
cementitious terrazzo tiles, ceramic tiles or enamelled baths with non-acid-resistant enamel.

For further application instructions, please refer to the Product Technical Data Sheet.

Storage

• Store in the original packaging
• Has a storage time of 24 months

Safety Note

Please note: This product can causes skin irritation and serious eye irritation. Avoid contact with skin and eyes and inhalation of vapours and mist. The user should wear appropriate protective clothing when handling the product, such as protective gloves, eye protection and face protection.

Please refer to the Product Safety Data Sheet attached for more information.

• 5L High Performance Keranet Cleaner
• Suitable for use on all acid-resistant material
• Can be used for indoor and outdoor walls and floors
• Able to remove limescale, rust stains and efflorescence
• Highly effective at removing cementitious grout residues and installation dirt