Ronseal Direct To Metal Paint Steel Grey Satin 750ml

Ronseal Direct to Metal Paint can be applied directly to rusty metal and provides an impressive 15 years of protection.

Key Features

• Suitable for use on interior and exterior bare metal, galvanised steel, stainless steel, wood, cast iron, aluminium and PVC
• 3 coats are best for rusty metal and ultimate protection
• Apply using a roller, brush or spray
• Protects metals from rusting
• Showerproof in 30 minutes
• Can be applied over rust
• Pleasing satin finish
• Recoat in 2-4 hours
• 15 year protection
• No primer needed
• Steel grey colour
• Water-based
• Low odour

Technical Information

• Dry time: Showerproof in 30 minutes
• Coverage: 8m² per litre
• Number of coats: 2-3 coats
• Coat time: 2-4 hours
• Volume: 750ml
• VOC: Low

Application Instructions

• Stir for 2-3 minutes before applying with a paintbrush or roller
• To spray this paint, dilute the paint in 10% water or follow your sprayers instructions
• Leave 2-4 hours before applying your second coat
• Apply 3 coats for maximum protection

Maintenance Instructions

• Wash brushes in warm, soapy water
• Check for imperfections every year
• If you notice imperfections, sand off any loose bits and reapply 2 coats of Direct to Metal Paint

• Ronseal Direct to Metal Paint boasts 15 years of protection for your surfaces
• Suitable for interior and exterior applications
• Can be applied directly over rust
• Steel grey colour
• Satin finish